Resurfacing a front porch with stamped concrete
On the November 2026 Herndon project, the front porch was already concrete. Rather than tear it out, the crew coated it with new concrete and stamped both the top and the sides, so the porch matches the new walkways: a light gray field with dark gray sides and border.


Resurfacing worn steps and a wall cap
On another Herndon home, the walkout basement stair treads had a worn, patched surface and the concrete wall cap beside the stairwell was spalling. The cap was repaired with a concrete repair product, and the stairs and cap were resurfaced with a clean, uniform finish.




When resurfacing makes sense
- The slab or steps are solid: no significant settling, movement or widespread structural cracking.
- The problem is the surface: wear, old patches, staining, minor surface damage, or a look you want to change.
- The added height works at doors and thresholds.
- Drainage around the area is acceptable, so water isn't the reason the surface failed.
If the concrete has sunk, heaved, or cracked through, a new surface won't fix what's underneath. In that case we'll tell you it needs repair or replacement instead. Our guide on resurfacing vs replacing a porch or slab covers how to tell the difference.
Related pages
Can an existing concrete porch be stamped without tearing it out?▸
On the November Herndon project it was: the existing porch was coated with new concrete and stamped on the top and sides. Whether that works on your porch depends on its condition and its height at the door, which we check on site.
Will resurfacing fix cracks?▸
Resurfacing addresses the surface. Cracks caused by settling or movement underneath need to be evaluated first; a new surface over an unstable slab can crack again.
Is resurfacing cheaper than replacing?▸
It often avoids demolition and haul-away, but it isn't the right answer for every slab. We'll explain which option we recommend, and why, after looking at it.
Talk to a Herndon-based concrete contractor
Call (703) 731-9208 (Monday – Saturday, 8:30 AM – 6:00 PM) or use the request-an-estimate page. We'll look at the site and put the recommended scope in writing before any work starts.
Request an Estimate